Following the successful launch of TracSafe Anti-Slip Sealer in 2021, Daich Coatings has now introduced TracSafe Anti-Slip Color Coat. Available in five colors, the real stone organic coating covers almost any ugly, blotchy floor surface.
TracSafe products bond firmly to a variety of interior and exterior flooring materials. This includes concrete, masonry, stone and pavers, tile, vinyl, linoleum and pre-painted floors.
Daich recommends starting a project with two coatings of the colored TracSafe Anti-Slip Color Coat. Then, finish the project with two coats of TracSafe Anti-Slip Sealer. As easy to apply as paint, TracSafe Anti-Slip Color Coat comes in Graphite, Shell Grey, Cream, Clay Brick and Terracotta colors.
Both TracSafe products have been tested and achieved ratings up to twice the industry-recommended safety standard. The product’s aggressive anti-slip performance with all-weather durability is ideal for both residential and commercial settings.
In the home, TracSafe can be used on garage and basement floors, utility areas and workshops, pool decks, patios and terraces. In commercial settings, the TracSafe coating and sealer system can be applied to numerous surfaces, including entrances and steps, walkways and access ramps, pool decks, balconies, valet parking areas and commercial/industrial floors.
According to the U.S. Bureau of Labor Statistics, slips and falls are the second highest cause of nonfatal occupational injury and illness incidents between 2014 – 2018.* The 2020 Survey of Occupational Injuries and Illnesses reports that there were 211,640 trips, slips and falls in the private industry sector in 2020.
High-performance TracSafe products come as low VOC pre-mixed formulas. Their odorless, water-based technology features fast dry-times and easy water clean-up. Both the coating and sealer have excellent adhesion capabilities. The products are designed to last with outstanding resistance to sun, snow, water, salt, chemicals, snow shoveling, foot and vehicle traffic.
To install TracSafe Anti-Slip Color Coat, simply roll down two coats of the product a few hours apart using a 3/8-inch paint roller. Then, after curing for 24 hours, apply two coats of TracSafe Anti-Slip Sealer. Wait another 24 hours and the system is ready for foot traffic.
TracSafe’s anti-slip technology lays down a uniform foot traction surface that exhibits effective slip resistance properties in both wet and dry conditions. This is effective with bare feet and various common pedestrian and work footwear.
*2018 Survey of Occupational Injuries and Illnesses, slide 14.
Be the first to comment on "Add Color and Avoid Slips on Surfaces"