Power management company Eaton announced the introduction of the Halo ALLSLOPE light-emitting diode (LED) Downlight System, adding more high-performing, energy-saving products to its recessed downlighting offering. Featuring interchangeable beam-forming optics, full-range dimming, and numerous color temperatures and trim options, the HL6 downlights are specifically designed for sloped-ceiling applications to fulfill residential, hospitality, retail and institutional needs.
The Halo LED ALLSLOPE recessed downlight system is specifically designed for sloped ceilings with pitch aiming from 2/12 (10 degrees) to 12/12 (45 degrees). The three-piece system consists of a choice of a 6-inch aperture housing, available in 1200 lumens or 1800 lumens, an LED light engine module with three interchangeable optics and a trim selection from a full line of compatible trims including reflectors, baffles and lens choices.
The high-efficacy LED downlights deliver up to 90 lumens per watt and are offered in 2700K, 3000K, 3500K and 4000K correlated color temperatures with a high color quality 90-color rendering index, satisfying California’s Title 24 compliance. The unique interchangeable beam-forming optics are available in Narrow Flood (25 degrees), Flood (40 degrees), and Wide Flood (55 degrees) options, which offer the ability to select a cone of light (beam angle) in proportion to the ceiling height. The aiming mechanism allows 360 rotation and locks the LED light module in place in accordance to the pitch.
The ALLSLOPE LED downlights offer dimming capability and are designed to last 50,000 hours. Depending on the selected housing, these AIR-TITE, ENERGY STAR-certified products consume only 19 watts or 27 watts of energy, replacing comparable 70-watt and 100-watt traditional reflector lamp sources. The products offer up to 73 percent in energy savings during the fixture’s lifespan (based on six hours daily use at $0.115/kilowatt hour).
The fixtures incorporate Halo’s contractor-friendly installation features including Got Nail! bar hangers with pre-installed nail and integral T-grid clip, Slide-N-Side wire traps and quick-connects for tool-less wiring outside the junction box, as well as the Pass-N-Thru bar hanger feature for tool-less shortening of bars without removal from the frame. The products are damp location listed with a wet location listing for showers and outdoor covered patios using lens trims.