Features and improvements include the following:
- Polaris 3D now allows the configuration of a dual ballast equipped fixture with cool white and warm white lamps for automatic tuning of white light. By manipulating the level of the ballasts controlling the cool white and warm white lamps in the same fixture, the color temperature of the light can change according to the current time of the day, providing the most suitable environment for an employee at that moment.
- Automatic association of zones and schedules decreases commissioning time.
- A pop-up warning wizard lists issues to be resolved prior to configuring a system, making it easier to view and settle them.
- Some buildings, such as hotels, use a temporary partition wall to split a room into two areas for different functions or meetings. When the temporary partition wall is placed across the room creating two zone, Polaris 3D now can automatically replicate zones for spaces with partition walls so commands are automatically replicated to both zones, or they can be treated as unique spaces.
- New comfort property settings allow facility managers to set parameters for reduced lighting levels during non-peak hours of the day to still save energy, without sacrificing employee comfort. Lighting levels can be set at a reduced level when a space is not in use, but if an employee enters the semi-illuminated area, it can be set to increase around an employee as they travel, providing more comfort for the individual.
- Users can configure lighting by simultaneous occupancy and time schedules within one zone. If a scheduled event has passed, occupancy sensing will become active.
- Previously, if the lights were shut off for a presentation in a board room, the HVAC system might think the room was not in use and shut off the air conditioning. Now with the new Assign Occupancy Sensing by Zone & Occupancy Behavior feature, Polaris 3D can instruct the HVAC system to remain on based on true occupancy sensor status, despite the HVAC system seeing that the fixture is off.
- Users can now lock or disable system inputs based on triggers, such as a contact closure, schedule or zone status. These overrides can be used in situations such as a school lockdown where the principal needs to ensure lights remain on during an emergency situation.
- Real time visible status notifications are now available, including fire alarm and emergency backup power
Occupancy sensors with built-in push buttons can be enabled through Polaris 3D.
Be the first to comment on "Lighting Management Software Facilitates Commissioning, Usage and Data Analysis of Lighting Installations"