Linear LED Lighting System Does Not Require LED Drivers or Additional Power Sources

The AC LEDStrip is a linear LED lighting system for indoor or outdoor use.

The AC LEDStrip is a linear LED lighting system for indoor or outdoor use.

Orgatech Lighting has released its AC LEDStrip, a linear LED lighting system for indoor or outdoor use.

Operating on 120 line voltage, AC LEDStrip can be used in runs up to 150 feet without the use of LED drivers or additional power sources.

AC LEDStrip is suited for a range of interior/exterior hospitality; commercial/institutional; retail merchandising; as well as upmarket indoor and outdoor residential applications.

AC LEDStrip can be concealed in and along ceilings and walls; coves, building, and room interiors; around baseboards and ceiling moldings; in staircases, along railings and columns. It’s also suitable for exterior path and contour marking; perimeter lighting, signage and architectural elements, and anywhere low-scale architectural LED lighting is desired.

AC LEDStrip is environmentally-sealed in a PVC co-extrusion, which is UV and chemical resistant. It can be installed both indoors and outdoors in a PCI channel or with snap-in mounting clips.

With a minimum length of 12-inches, and maximum of 150-feet, AC LEDStrip measures .61-inches wide by .25-inches high and has a 2-inch bend radius. LEDs produce 180 lumens per foot from 2.2 watts per foot; or 420 lumens per foot from 4.5 watts per foot, with high efficacy of 100 lumens per watt and a CRI of 90+.

Its AC LEDStrip is available in 2700K, 3000K, 4000K and 5000K color temperatures, it is factory-cuttable every 12-inches and is UL Listed for indoor dry/damp and outdoor wet applications. It is dimmable with an electronic low-voltage or incandescent dimmer and has a 5-year, 50,000-hour (LM79) factory warranty.

Be the first to comment on "Linear LED Lighting System Does Not Require LED Drivers or Additional Power Sources"

Leave a comment

Your email address will not be published.


*


%d bloggers like this: