Anchor Products LLC has introduced a permanent, non-penetrating solution for attachment of lightning protection equipment to low-slope roof membranes.
The Anchor LP-800 and Anchor LP-400 offer non-penetrating attachment to roof membranes and can be quickly installed at a rate of 20 per man hour. Each attachment system is lightweight and provides permanent attachment to all traditional roofing materials.
The products include the Anchor LP-800 (Air Terminal Base) and the Anchor LP-400 (Cable Clamp Base). The Anchor LP-800 is a 3-inch stainless-steel base plate with a ½ inch to 13- by 2-inch bolt weighing less than 6 ounces. The Anchor LP 400 is a 2-inch stainless-steel base plate with a ¼ inch to 20- by 1-inch bolt weighing less than 4 ounces. Each plate is heat fused to an 8- by 8-inch single-ply membrane target.
The Anchor Products lightning protection products provide a simple peel and stick installation to TPO, EPDM, asphalt, metal and other traditional roofing materials. PVC and TPO lightning protection anchors can also be hot-air welded to the roof membrane. The Anchor LP-800 and LP-400 meet all the common code body requirements for lightning protection rooftop attachments.
www.AnchorP.com // (888) 575-2131
Be the first to comment on "Peel-and-stick Lightning Protection"