KIM Lighting has introduced the second generation Wall Director, which is redesigned for LED.
One of the features of the Wall Director is its -5 to +10 degree lockable tilt adjustment, which allows for fine-tuning to enhance textural lighting effects and photometric performance. The lower housing rotates against the mounting arm housing to provide adjustments without changing aesthetics. At zero degrees the lens is concealed from view above horizontal with the fixture mounted in the downward position.
With -5 degree adjustment, this wall pack LED is ideal for architectural applications where the building façade has surface textures, reliefs, projections or other embellishments, and grazing the wall with light is intended to produce a nighttime effect. With +10 degree adjustment, designers can increase forward light throw to maximize the illumination area when mounting in the down position, or to illuminate large overhangs in ceilings and canopies.
The form of the Wall Director integrates into many applications. Drawing from a classic design, but with a profile that is smaller, this sconce offers architectural shape. The materials that make up the Wall Director give it a ruggedness that ensures the luminaire will stand the test of time.
The standard clear lens provides up to 17,000 delivered lumens at an efficacy range of 95 to 145 lumens per watt. The Wall Director also features a diffuse lens option providing a mix of both photometric performance and visual comfort.
Wall Director is a Dark-Sky approved, full cut-off luminaire when in the down position. The luminaire integrates Strike Optics to maximize target zone illumination with minimal losses at the house-side. This increases luminaire spacing, lowers installation costs, and reduces energy consumption all while providing uniformity.
Integral sensors and wireless controls ensure there is no compromise to the form factor of Wall Director. Control capabilities include SiteSync from Hubbell Control Solutions. With its pre-programmed approach, installation of SiteSync reduces the complexity, time and cost compared to typical field commissioned systems. In addition to the integrated controls, this wall pack LED offers a fully integrated battery backup option to meet emergency egress requirements.
Features and Benefits of the Wall Director:
- -5 to +10 degree tilt adjustment
- Two housing sizes
- Standard fixtures can be mounted in both up and down positions
- IES Type I, II, III and IV distributions
- Spot/Column and Wall Graze distributions
- Dark-Sky approved in the down position in 3,000K CCT
- 3,000 to 17,000 delivered lumens
- 28 to 130 watts at up to 145 lumens per watt
- IP66 rated optical assembly
- Clear or diffused lens options
- DLC Premium and Standard listings