iQ Power Tools has presented the iQMS362, an addition to the iQ360 line of masonry saws. Whether the materials are small or large, this masonry saw is designed to save cutting time and increase productivity.
The iQMS362 is built to tackle any jobsite. Its 16.5-inch Q-Drive blade was engineered for this tool. Tests have shown this blade cuts 40 percent faster than its competitors. The Q-Drive blade cuts masonry materials in a range of shapes, sizes, weights, and densities; from manufactured stone to dense pavers or granite.
The masonry saw eliminates the dust cloud, allowing workers to increase their productivity while staying compliant with OSHA regulations. The iQMS362 was designed with the health and safety of its operator in mind, meeting the OSHA Silica Permissible Exposure Limit (PEL) of 50 micrograms of respirable crystalline silica per cubic meter of air (?g/m3), averaged over an eight-hour day.
The iQMS362 features:
- 16.5-inch Q-Drive blade with a 5.5-inch depth and a full 24-inches length of cut
- IQ Power Management System allows the saw to run on 120 volts and 20 amps
- 270 degrees Dust Reduction System
- 3 Stage Cyclonic Filtration
- Transport system includes high-flotation tires, an integrated stand with powered lifting/lower mechanism and caster wheel with 360-degree rotation
- Efficient cutting speed
- OSHA Silica PEL compliant
The iQMS362 was designed to overcome common power limitations of most masonry saws which operate on 220v of electricity. It operates using a standard 120v and 20 amps, eliminating the need for a 220v plug adapter or high-output generator. Integrated with soft start technology, the iQ Power Management System controls the power ramp up without the spike.