With the introduction of the new options, the WoodWorks Grille line of standard products now includes three slat widths (5/8-inch, 1-inch and 1 1/4-inch), five slat depths (1 3/8-inch, 2 1/4-inch, 3 1/4-inch, 4 1/4-inch and 5 1/4-inch), and five slat patterns (3, 4, 5, 6 or 8 slats per panel). In addition to the standard options, custom slat widths, depths and configurations are also available.
Depending on the size of the panel, WoodWorks Grille panels are available as backer, dowel, or new backer and dowel combination panels. In terms of finishes, all panels are offered in Grille Maple, Grille Light Cherry, Grille Dark Cherry, Grille Walnut and new Grille White. Custom finishes are available, as well.
An economic alternative to custom millwork, WoodWorks Grille panels install easily on the ceiling, on a wall, or as 90-degree angled or faceted ceiling-to-wall transitions. A custom curved application with flexible backer is also available.
Acoustically, WoodWorks Grille panels have a Noise Reduction Coefficient (NRC) of 0.75 when installed with a BioAcoustic infill panel. In addition, all panels are engineered, tested, and approved for use in all seismic areas.